Repair Damage JAF BOX, recognized as other BOX firmware
Source has posted here http://www.sw-box.com/forum/sarassof...d-ufs-box.html

but here I want to share, how to repair damage jaf eeprom by this
program such as if your box has detected as another box,

Dont forget to unplug all box that you have ( If you have another box
unplugh it first)

1. Donwnload Mprog from here http://www.ftdichip.com/Resources/Ut...g3.0_Setup.exe

2. Download jafusb.ept

3. Install Mprog on your PC

4. Connect your JAF box, is it recognized as JAF flasher interface? if
it isnt recognized as Original JAF box try to open device manager and
uninstall the current driver and unplug your box or if you are not sure
about the driver that still in use, just download FTCLEAN here http://www.ftdichip.com/Resources/Utilities/FTClean.zip
, run this program and will clean all ftdi driver on your PC, make sure
no box connected with your PC

5. connect your box, if windows ask for installation new driver select
manual source folder, select source folder on c://program
files/Mprog2.3/drivers and wait until the installation finished

6. Now open the Mprog that you have installed and follow the tutorial


It tested for me, now my JAF work fine


Copas dari sebelah... Saya sendiri belum mengalami, jadi belum Saya coba Tested apa gak...

hati2 dalam penggunaan MPROG.
salah langkah.... malah bikin atmega nya sama FTDI ga bisa dikenali lagi..